I am trying to upgrade my PC with a new motherboard an MSI 648f Neo, a 3.0Ghz CPU and PC2700 DDR 333MHz dimms.
At first I couldn't get anything to run not even the fans.
This was most likely down to an additional mounting post that didn't affect the old board.
That sorted the fans all run, the LED's show and the drives run up too, but I get no video signal and there is no POST not a single beep. I have run the board out of the case with nothing but one dimm, the CPU, heat sink and fan and the graphics card but nothing no beep from the POST or video output.
Could the short have damaged the motherboard?
At first I couldn't get anything to run not even the fans.
This was most likely down to an additional mounting post that didn't affect the old board.
That sorted the fans all run, the LED's show and the drives run up too, but I get no video signal and there is no POST not a single beep. I have run the board out of the case with nothing but one dimm, the CPU, heat sink and fan and the graphics card but nothing no beep from the POST or video output.
Could the short have damaged the motherboard?