Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No valid IP add off DHCP ??!!

Status
Not open for further replies.

Pylie

IS-IT--Management
Oct 16, 2006
28
GB
I can connecty to a wireless router fine. But it doesnt give me a valid IP address.

All other laptops work fine.

Brand new HP NC6400 (I have 6 and they are all the same).

Someone said something about upgrading Winsock to ver 2 ???

Help and thoughts !

Thanks in advance
 
What is not valid about the IP address?

What happens when you type
Code:
ipconfig /all
on the cmd prompt
 
Windows IP Config :
host name:(name of PC)
Primary DNS Suffix:(name of company.com)
Node Type : Broadcast
Ip Routing Enabled : No
Wins Proxy : No

Ethernet adaptor Wireless Network Conn :
Connection -specific DNS Suffix :
Description : Intel etc
Physical Address : 00-19-d2-18-b9-88
DHCP Enabled : Yes
Autoconfiguration Enabled : Yes
Auto Config Ip Add : 169.254.235.215
Subnet Mask : 255.255.0.0
Default Gateway :

NOTE : Wirles Icon says its connected to the specific Wireless Router but has limited or No Connectivity :

NOTE : Setting Should Be :

10.2.100.x
255.255.255.0
10.2.100.25

 
Autoconfiguration Enabled : Yes
Auto Config Ip Add : 169.254.235.215

verify that ur firewall permits dhcp protocol, ur getting a autoconfig ip from windows, that usally happends when the dhcp server cant be reached

 
I must be missing sumthin here.

If I can connect wirelessly (to the DHCP Router) then why would it not issue the correct address ?

Windows Firewall is turned off .........
 
Utility available on the laptop to verify connection? And to change security settings?
Even though you are connected by radio your security settings may be blocking the packet transfer at either end.

Ed Fair
Give the wrong symptoms, get the wrong solutions.
 
So - whats the solution ???

 
With it being wireless, do you have WEP enabled (or MAC address filtering) and is this setup on the laptop ok?

Also, is your router configured to only give a certain number of IP Addresses out?

As already mentioned, you will get the 164 IP Address if the DHCP server (in this case your router) cannot be connected to. And although you say you can connect to the router, maybe the reason you do not get a valid DHCP address is because the WEP authentication (or whetever authentication you use) is not working correctly.

--------------------------------------
"Insert funny comment in here!"
--------------------------------------
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top