No Telnet after NAT outside

[DarthPanda]

I used to be able to Telnet through my WAN interface during the configuration of my 871 router before I set up nat outside. I can still Telnet and SSH from an internal address. Now I am getting failed connections for both Telnet and SSH through the WAN interface. NATing now works fine for internal hosts. I previously had a static IP on my WAN interface, now I have DHCP. Could this be the reason? I can ping the WAN IP. Nothing has changed in the VTY settings.

 

[imbadatthis]

what ACL you have on your WAN interface ?


We must go always forward, not backward
always up, not down and always twirling twirling towards infinity.

 

[DarthPanda]

ip nat inside source list 1 interface FastEthernet4 overload
!
access-list 1 permit 192.168.1.0 0.0.0.255

That's the only access list I have.