Hello,
After adding a new SDLT320 drive in jukebox L700, networker load a volume in this drive, but label verification fails on this error :
nsrd: /dev/nst4 Verify label operation in progress
nsrmmd #6: tape_bsf bsf failed: drive status is The drive is not ready and the reason is not known
nsrd: media warning: /dev/nst4 moving: tape_bsf bsf failed: drive status is The drive is not ready and the reason is not known
nsrd: media warning: /dev/nst4 reading: no tape label found
nsrmmgd: RAP error: Invalid resource data.
nsrmmgd: Cannot update operation status resource (instance2)
The problem is the same with all tapes. Errors in /var/log/messages are the same. Jbverify show any error. mt -f status gives no error. I try to increase "load sleep" to 120s, but without success.
Firmware of this drive is the only difference with others drives (>)
Device block size is configure on "variable"
Networker software is 7.3.1, running on Linux X86 - RedHat AS4.
Do you have idee about this ?
Many thanks
After adding a new SDLT320 drive in jukebox L700, networker load a volume in this drive, but label verification fails on this error :
nsrd: /dev/nst4 Verify label operation in progress
nsrmmd #6: tape_bsf bsf failed: drive status is The drive is not ready and the reason is not known
nsrd: media warning: /dev/nst4 moving: tape_bsf bsf failed: drive status is The drive is not ready and the reason is not known
nsrd: media warning: /dev/nst4 reading: no tape label found
nsrmmgd: RAP error: Invalid resource data.
nsrmmgd: Cannot update operation status resource (instance2)
The problem is the same with all tapes. Errors in /var/log/messages are the same. Jbverify show any error. mt -f status gives no error. I try to increase "load sleep" to 120s, but without success.
Firmware of this drive is the only difference with others drives (>)
Device block size is configure on "variable"
Networker software is 7.3.1, running on Linux X86 - RedHat AS4.
Do you have idee about this ?
Many thanks