Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Network activity

Status
Not open for further replies.

ClayH

Technical User
Dec 14, 2003
10
US
I have a co-workers computer that I am trying to repair for him, he is on Dial-up at his home with this computer so to help assist my needs I installed an SMC NIC on this machine, installed fine, but I am unable to access the internet, I have checked and double checked all my settings that I know of.

Need some help fellas!

OS - WinME
Connection - No router, straight from the cable modem.
 
Yes I have. and it can ping the local host.
 
What's the OS? What about ipconfig /all? Anything? Can you access a web site by means of a ip address?
tek-tips.com = [ 216.45.19.33 ] Is it set to use DHCP or a fixed IP? Good luck.

Glen A. Johnson
If you're from Northern Illinois/Southern Wisconsin check out Tek-Tips in Chicago, Illinois Forum.

TTinChicago
 
It is set to use DHCP. The OS is WinME. in which I couldn't remember the commands for cmd. I didn't try using a IP but, I wasn't getting any activity by pinging anything outside the local host.
 
instead of cmd: command.com

instead of ipcongig: winipcfg

at least check there if you got an IP adress from your provider.

No firewalls running that block ICMP (PING) packets?
regards,
Robert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top