no name from one site to another

[bpg1]

hi all

have a rel 5.0 via ip trunks to nrs to rel 4.0 from rel 4.0 normal pri tie to rel 3.0.

ext. on rel 3.0 calls ext. on rel 5.0 name and number is ok, but when ext. on rel 5.0 calls ext. on 3.0 only number??

anyone knows what could be wrong??

 

[pronei]

Check your DCH settings, make sure you have ND2 in RCAP config'd on each side.

 

[bpg1]

hi pronei

rcap is set to nd2

 

[911guru]

Make sure you have a PINX DN set in each switch.

LD 15 Net data block.

911Guru

http://pbx-e911.com

E911 FAQs are located at:

http://www.tek-tips.com/faq.cfm?pid=798&handle=911guru

 

[pronei]

What is a PINX_DN?

What does it do?

 

[911guru]

It's kind of an identifier for the PBX introduced with Q.Sig. Having it configured seems to be required to get CPND to work. It is used for PBX to PBX facility messages.

911Guru

http://pbx-e911.com

E911 FAQs are located at:

http://www.tek-tips.com/faq.cfm?pid=798&handle=911guru