I have a problem with transfering data to a computer with me installed as although the computers are linked and I can see them whenever I try to transfer data it loses it's connection which is frustrating. As the computer is still there for me to browse to and reconnect. I have TCP/IP and netBUEI any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
no longer connected
- Thread starter jrlh
- Start date
I had the same problem when i had a lot of collisions on my private network. I had made a misstake when i moved one computer.
When all computers was back in the hubs correctly it worked fine again...
So check if you have connected all the comoputers correctly.
Maby you will find out why you loose the connection.
/sheowulf
When all computers was back in the hubs correctly it worked fine again...
So check if you have connected all the comoputers correctly.
Maby you will find out why you loose the connection.
/sheowulf
- Thread starter
- #3
- Status
Similar threads
