Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No DTMF over Voicenetwork
- Thread starter Scuzzie2k
- Start date
- Thread starter
- #3
Sounds like Site A is not sending the correct digits to site B.
You should be able to see the digits sent from site A and the digits received at site B.
Turn on monitor for each site and make a test call. Pause the traces to see what is sent and what is received.
You should be able to see the digits sent from site A and the digits received at site B.
Turn on monitor for each site and make a test call. Pause the traces to see what is sent and what is received.
Might be a silly question but are you adding in the dial code for site B in the ARS to site A?
Site B sc 9N/N/ARS
ARS N/9N line group to A
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
Site B sc 9N/N/ARS
ARS N/9N line group to A
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
- Status
