NO DIAL TO PSTN

[ANESTECH]

HI TO ALL

ME HAVE THE NEXT SCENARIO FOR TREE PBAX, TWO NORTEL AND ONE VCX CONNECT

- ONE PBAX CS1KM, MAIN, OUTGOING/INGOING CALL TO PSTN
- ONE PBAX CS1KE, REMOTE
- ONE PBAX VCX CONN 200, REMOTE

THE TREE PBAX WORK SO

- PBAX CS1KM TO PSTN WITH TRUNK DID IN R2MF, TRUNK TIE TO CS1KE, TRUNK TIE R2MF TO VCX
CONN 200

SCENARIO CS1KM
EXT 2XXX TO EXT 4XXX, OK
EXT 2XXX TO EXT 5XXX, OK
PSTN TO EXT 2XXX, OK
EXT 2XXX TO PSTN, OK
(9+12345678)

SCENARIO CS1KE
EXT 4XXX TO EXT 2XXX, OK
EXT 4XXX TO EXT 5XXX, OK
EXT 4XXX TO PSTN, OK
PSTN TO EXT 4XXX, OK
(9+12345678)

SCENARIO VCX CONN 200
EXT 5XXX TO EXT 2XXX, OK
EXT 5XXX TO EXT 4XXX, OK
PSTN TO EXT 5XXX, OK
EXT 5XXX TO PSTN, NO OK
DIAL 9+12345678 AND ONLY SEE 9+123 IN CS1KM, TAKE TRUNK FOR PSTN BUT NOT GET RECEIVE ALL DIGITS FROM VCX ONLY 9+123

WHAT CAN I DO FOR RECEIVE ALL DIGITS FROM VCX CONN?

THANKS

 

[Firebird Scrambler]

You might need to set-up the D Channel monitor facility in LD 96 to view the messaging string. I think the problem lies with the VCX CONN 200 only sending out a CLID of 4 digits (same as the extension range).

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[ANESTECH]

I AM USING FOR MY TRUNKS DTI´S AND NO PRI´S.