Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No CLI on DPNSS Route

Status
Not open for further replies.

notconfident

Programmer
Aug 9, 2008
18
GB
I have DPNSS Route between a Mitel SX2000 and a Nortel CS1000. The SX2000 is connected to the Public Exchange. A call comes in from the SX2000 to the CS1000 and I can see the CLI (say my mobile number for a test call). If I transfer the call to another CS1000 phone the CLI is there. If I transfer the call back across the Route to an SX2000 extension the CLI is lost. If I set a call forward on the CS1000 extension to an SX2000 extension, then call in on my mobile I can see my CLI. I assume its the Class of Service of the CS1000 extension but can't see what it could be. Similar calls to other SX2000 systems are fine just to the CS1000
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top