Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No CID when VM outcalls on SIP

Status
Not open for further replies.

Bivman

Technical User
Jan 13, 2008
60
US
Hi folks!
When my VM calls out to let me know there is a message waiting,
the SIP invite From: field shows OUTBOUND_ALERT@ot.bandwidth.com

On a normal outgoing call, the system pulls the CID from the SIP NAME field in each user's SIP tab, with the resulting invite showing 618XXXXXXX@ot.bandwidth.com

Is there a file somewhere that stores the outgoing number or name for use
when the VM calls out?

I tried creating a user named OUTBOUND_ALERT with the number in that
SIP tab, but that didn't work.

I have an IP Office IP500 v4.2(17)

Thanks,

-Jon
 
It think vmpro uses the wrong out going line id.

Make a shortcode pointed to an ARS.

SC: 999N / N / ARS id

So the number for the transfer in VMPRO needs to be

999 + the number you want to dial.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
>SC: 999N / N / ARS id
999 probably isn't the best code to use...

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
Evidently VMPro uses 9+ dialing. Where can I change the short code that VMPro uses to dial?

Thanks,
-Jon
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top