swoolgrove
Technical User
Hi, I have installed a CD-WR on my machine as secondary slave but Windows fails to find it in "My Computer" whilst it is showing in "Device Manager" and appears to be working properly. I have tried swapping the drives around from slave to master but only the master is seen. Both drives are seen and work when I access them through a windows 98 boot disk, although when I go into the BIOS no secondary slave is installed also both CD-Drives will work independently from each other in windows but just never together.
I have tried to find "NoIDE" in the registry but to no avail and a new IDE cable didn't work for me neither. This is the first time I have tried to install a new drive so it might be something glaringly obvious.
Any help would be more than welcome,
thanks in advance,
Steve
P.S. Im running Windows 98SE
I have tried to find "NoIDE" in the registry but to no avail and a new IDE cable didn't work for me neither. This is the first time I have tried to install a new drive so it might be something glaringly obvious.
Any help would be more than welcome,
thanks in advance,
Steve
P.S. Im running Windows 98SE