Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Busy Signal on a PRI 1

Status
Not open for further replies.

PCGtech

Vendor
May 10, 2006
17
Hello,

I have a PRI installed on a 406v2 running 3.1.56. I have a problem in when I dial a number that is busy the system is dropping the call immediatly and the user does not get a busy tone. Any Ideas?

Thanks
 
Your extn is set as "off hook extn" diable this feature & you will get busy signals again
it is only required for analog handsets that arte being used with headsets.
headsets on digital handsets do not require this setting
 
Thanks for the tios I believe "off hok station" is my problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top