Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No AUDIO on VAL announcement board from VOIP phone

Status
Not open for further replies.

suitz

Vendor
Nov 2, 2006
67
US
I have an issue when recording announcements from a IP telepone to a VAL board. The recording takes successfully, but there is silence.

The seconds of recorded time DO show on the integrated-announcemetn list. But there is no audio recorded.

From a digital phone, on the same annoucenment board and extension I have no issues. Any thoughts?

 
I might be wrong but my guess would be that the IP network region feeding the phone is set up with a Mulaw codec while the Global system is set up for Alaw or the opposite way around.

Display the codec in the ip-network region the phone is registered to.
Then display the location parameters
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top