No Audio on SIP Trunks

[vpmol]

Trying to do mobile twinning on my SIP Trunks, but I have no audio. I am using a Netgear FVS318 VPN Router and have opened up all the ports that my provider has indicated with no luck.
The provider has it working but they have their IP500 on a public IP.
Now if I try to put my IP Office in front of my VPN Router, I get no internet connectivity. Also I have set up a DMZ with the IPO IP Address to no avail.

Does anyone know how I can put my IPO on a public IP Address and still have my computers & VPN IP Telephones work properly??

 

[DavidCT]

You need at least two public IP's to do what you ask.

One IP would remain on our Netgear, the other would go on WAN2.
You then need to properly configure your IP Routes, and steer your SIP traffic through WAN2.

 

[Bas1234]

And keep the SIP codec the same as your provider, so first check what they use by default.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[vpmol]

David I do have an extra public IP. Do you know what type of IP route I would need to put into my IPO? Maybe you have an example that I can use to configure mine. Thanks for the tip

 

[vpmol]

Also do I plug into the LAN or WAN port when trying to do this? And do I keep it on my LAN just like before?

 

[TheodisButler]

Don't touch your LAN port in order to have your computers and VPN IP phones work as is.

Be sure to enable the firewall on your WAN port after you successfully test everything.

Theodis Butler
President

http://www.megalithtechnologies.com