niu question..

[taurus2711]

hello to all I wanted to make a question simple. like it is made to set up the door ethernet of the niu in order to program with winfiol.
hello and thanks
in italiano
ciao a tutti volevo fare una domanda semplice.. come si fa ad impostare la porta ethernet della niu per programmare con winfiol.

 

[FHTMD110]

Hi....
Which Ver. ?
In BC12 U can do:
IONPP;

IONPC:EQU=xxx-xx-xx-x,IP=xxx.xxx.xxx.xxx,MASK=255.255.255.0,GATE=(FROM IP RANG);

In Winfiol selct a TCP/IP channel and in setup set the ssame IP in NIU, of course U must set the IP in your PC the same range of the NIU.

Be Louk
FHTMD110

 

[taurus2711]

version and bc 11. I have tried to make the commandos said but it does not work winfiol does not succeed to be connected. in winfiol 5,1 the host demands me and I put it IP address and the door asks me but which not to put.

la versione e bc 11 ho provato a fare i comandi detti ma non funziona winfiol non riesce a collegarsi. in winfiol 5.1 mi richiede l'host ed io gli metto l'indirizzo ip e mi chiede la porta ma non quale mettere.

 

[fouesnant]

Hi

As soon as the IP adress is entered, you must unplug and plug again the NIU board; in this way the IP settings are taken into account.
Before trying to open the telnet session, make a ping to the IP adress you have given for the NIU board to see if it answers

best regards

 

[dbc4xxx]

also use
IOEQI:IODEV=TELNET,EQU=x-x-xx-4,TYPE=NETWORK,USAGE=MML;