niu/1 & niu/2 FW 1

[md110user]

Hi guies,
1-What is the impronment on FW:R18A for NIU/1?
2-What is the impronment on FW:R7A for NIU/2?

thanks

 

[md110user]

Sorry for typing mistake.
Hi guies,
1-What is the improvement on FW:R18A for NIU/1?
2-What is the improvement on FW:R7A for NIU/2?

Thanks

 

[acmi]

NIU1 suppports SCSI hard drive interface only,
NIU2 supports ATA hard drive of flash card interface only.

 

[singhbrindisi]

ianwiebenga :

md110user is trying to compare the fixes in the latest FW with the older version for NIU/1 & NIU/2...

cheers,


""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[md110user]

to singhbrindisi
You are right I am looking for the corrections that had been made on the new FW.


Regards

 

[whosrdaddy]

R18A :

Reason for revision
a Modem connection fails. See FR102988.
b Niux command "start" added. See FR104537.
c Feature to upgrade boot code via firmware download added.

R7A :
Reason for revision
a Modem connection fails. See FR102988.
b Niux command "start" added. See FR104537.
c NIU2 with ATA fails after power down. See FR103057.
d NIU2 fails to reload. See FR105112.
e Reload from a ATA slave disk is not working . See FR100946.
f Feature to reset ATA bus added. See FR 101500.
g Feature to upgrade boot code via firmware download added.

cheers

--------------------------------------
What You See Is What You Get