Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Night service stopped working BCM 400 3.7

Status
Not open for further replies.

jobejobe

Technical User
Joined
Jun 23, 2013
Messages
10
Location
US
Strange thing that happened a few weeks ago. The night service that has been working for years on the BCM 400 3.7 stopped. I have checked and rechecked the configurations and it still will not work. It was set for M-F 9am to 530pm lunch 1pm to 2pm and closed sat-sun.

Everything else is ok and no one else has access to the programing
 
Have you rebooted the BCM as the NT software tends to lock up after a while on the older releases.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
I have done a soft reboot but not a power down and power on reboot just because it is so old and I did not want to take the chance that it would not come up. Will a power cycle reboot do the trick?

I believe that I am suppose to do a reboot and wait til the lights change to yellow and then turn off the power is that the safe or graceful way to power done?
 
I did a power cycle and it work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top