Night Mode with EVM

[dneis]

Helo,
I have configured a night message on a box with the EVM for an extension and a forward.

I have few questions :
- How can you configure the default night mode to an extension when you dial *44 ? or in other word what is the night mode default when you dial *44 and the system prompt for *=default

- how can you avoid to have the message : "you call is handled by the phone system" and them be transfered to the night mode..

I think that's all
Cheers,
DEnis

 

[obtsystems]

How are you looking to sendi the call to the mailbox
Is it a virtual extension number or a real one
When you put it in to night what is set to ring
Do you have the programming tool?

 

[dneis]

Hello,

Thanks for your answer, I used a physical phone yes (ext. 102).
I am using Manager E to do this programming.

When it is in night mode, i have configured in Incoming Calles->Ringing assignment per line my 102 extention as Night call no.

Regards,
Denis

 

[obtsystems]

if you use *91 press the button to program for night, scroll to night and press correct then correct for default, that button will switch the system in to default night mode and use night ring table

 

[dneis]

Hello THere,

thanks for the answer
Regards,
Denis