Night 1 and Night 2 on sx-2000 1

[saw164]

i have an extension i want to foward, that is programmed to ring on multiple phones, but isn't the prime number on any phone. So i decied to try and use night 1 and night 2 to foward it to an extension off our Avaya PBX that is located at another location. What i have done so far, is created a phantom speed call number 2*2(that points to the avaya extension) that i have set-up as the reroute number for the always alternative number 7. I then set that number for the Night 1 and Night 2 in the call rerouting assignment for the extension. I am now trying to find out where i set the times for night 1 and night 2. Thank you for any help that you can give.



Scott
________________________________________
When Life Gives You Questions, Google has Answers - AJ Carpio

 

[kwbMitel]

You can forward key lines by using the Third Party Call forward code.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[saw164]

REALLY!!!! i knew there had to be an easier way. Thank you



Scott
________________________________________
When Life Gives You Questions, Google has Answers - AJ Carpio

 

[kwbMitel]

Seeing as you gave me a star, I'll be more specific.

Program a code for:
Call Forwarding - Follow Me - Third Party
and
Cancel Call Forwarding Follow Me - Third Party

You will need to enable the COS option - Third Party Call Forward Follow Me - Accept for the phone that has the appearance on it and Third Party Call Forward Follow Me - Allow for the phone that will set the call forward.

The feature code is used by dialing:

FAC + DN to forward + Destination

Cancelled by dialing

FAC + DN



*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.