NI2 next step 1

[ichabob]

Well after getting LD calls to go over PRI and getting CNUM and CNAM coming in, I am having outbound CLID problems. When I dial to a residential analog line with Caller ID at the Telco, my number displays unknown. When I dial a cell number that is setup using the same RLI in NXXs, I have the number displayed. ?? Any suggestions.

 

[johnpoole]

that one sounds like a co problem, did you turn on and off service messages back to the co. some co's need it some don't..

john poole
bellsouth business
columbia,sc

 

[Reusser]

Change your CLIDs so that the hntn is blank, HLCL is the area code and prefix.

this will send out 10 digits whether you dial 7 or 10

 

[ichabob]

Thanks Reusser, I already fixed it this way just before you posted. This was the answer.