Newbies with new system 6x16

[domeconnection]

I buyied a used Nortel Norstar phone system 6x16 with 5 7310 phones.
Missing adapter/connector to plug my phones.
How I can plug my phones in my Norstar system?

Thanks

 

[aragon]

Standard 25 pair/50 pin female amphenol cable, available from Anixter or any telecom supply house.
You should call somebody to install for you.

David Brillert

http://www.williamsglobal.com

 

[domeconnection]

Good, but where I can find connection instruction to plug each phone on the system?
Example: pin 1 system --> pin 1 phone
pin 2 system --> pin 4 phone
etc ...

How much wire are used to plug each phone in system? 2 or 4?

 

[jerryreeve]

in the FAQ's is a pinout of the wiring for the 616. are you intending to use this as your system or are you looking at the 616 as a learning tool? if you are wanting to learn about the ICS' you would want to read an installer guide...check out this guide

http://www.jandjcommunications.com/.../norstar/Norstar_616_w_DR5_DS_Programming.pdf

If you are going to be using this system as a business then you probably need to have a telephone tech hook you up to preclude business disasters.

JerryReeve
Communications Systems Int'l
com-sys.com