Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Newbie question

Status
Not open for further replies.

dogg1

Technical User
Nov 3, 2008
217
US
Hi All,

We are currently migrating off our Avaya System and onto Cisco UC System. I have never worked with SNMP. I'm getting ready to alarm a couple Clusters. We will be using V3 SNMP and sending SNMP/Traps to Solarwinds. I have double checked all my config more than once and I still cant get a test trap(via CLI) to come up on the SolarWinds Alert page. Any suggestions? Also, do you have to load the MIBS onto CUCM Servers?

Any help is appreciated. Thanks in advance.

JW
 
I would recommend that you navigate to the Cisco Unified Serviceability page (top right) and look at the SNMP dropdown.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top