Forgive my ignorance - as I hear it's quite simple (and I have no documentation) - to load a PowerMac from scratch (I'm putting in a new hard drive that has no OS on it ), I have the Mac OS cd - is that all I need ..? I've heard of a startup disk - what's this for ..?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
newbie - needs to load Mac OS on a need hard drive
- Thread starter ianj1
- Start date
- Thread starter
- #2
Put the disk in the cd player and boot while holding down the "c" key. This boots on the cd. You will see a background wallpaper composed of a bunch of little cds if it worked ok. When prompted tell it you want to do a new or "clean" install and direct it to the proper drive. No startup disk is necessary if you have a pretty recent OS.<br><br>Good luck!
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question