new number serie on MD110

[gh4aka]

problem: I had to move a number serie 3200 - 3219 from MxOne to MD110
what I have done:
MXone:
nanse:numtyp=ex,numse=3200&&3219; erase local serie on MXone
roddi:dest=320,rou=10,srt=1,adc=050510000000025000500000000; route 10 points to MD110
roddi:dest=321,rou=10,srt=1,adc=050510000000025000500000000;
nansi:numtyp=ed,numse=3200&&3219; serie is now externel
MD110:
nanse:numtyp=ed,numse=3200&&3219; erase external serie
rodde:dest=320; erase external route
rodde:dest=321;
nansi:numtyp=ex,numse=320&&321; initiate local serie
ksexi:dir=3200,cat=28,itype=33,equ=001-0-32-00;
=> dir not in range !!!
nadap lists the numbers, routing ok

thanx in advance
günter

 

[gh4aka]

susip:dir=3200;
=> directory number not in extension number series
nadap:numtyp=ex;
=> lists
1705 - 3199
320 - 321
3220 - 3999

what is missing that the MD110 accepts the new range ?

 

[whosrdaddy]

320 is not equal to 3200.

you must initiate the number series to the same length of your extension:

nansi:numtyp=ex,numse=3200&&3219;

/Daddy


-----------------------------------------------------
Helping people is my job...

 

[gh4aka]

thanks for your fast reply, but this was my first try and i got:
<nansi:numtyp=ex,numse=3200&&3219;
<nadap:numtyp=ex;
NUMBER ANALYSIS DATA
TYPE OF SERIES NUMBER SERIES
EXTENSION NUMBER SERIES 1200 - 1700
1703 - 3199
321
3220 - 3999
i have also tried to initiate every single extension,
also got "dir not in range" when try to configure it with
ksexi:dir ....
now i tried
nanse:numtyp=ex,numse=321;
nansi:numtyp=ex,numse=3200&&3210;
nadap lists:
EXTENSION NUMBER SERIES 1200 - 1700
1703 - 3210
3220 - 3999
and
KSEXIIR=3209,CAT=29,ITYPE=33,EQU=008-0-30-02,ADC=00000000010000,CALALT=1,TRM=2,LANG=F,TIMER=0,BSEC=0;
worked - no error messages
susip:dir=3209; no error messages
sudip:dir=3209; no error messages
phone workes

it seems that if i got a additional num serie between 1703 - .... and 3220 - ...
the new extensions didn't work - this is for me really curios
what can i check to get the reason for this ?

thanx günter

 

[Monrovia]

Hey,

Did you end the ED series in NADAP? because, i found in your post about ending a route DEST.

NANSE:NUMTYP=ED,NUMSE=321; ??

BR.
Monro

 

[gh4aka]

thanxs for your answer, yes i have
but now i think i got troubles with the hardware
'cause dusyi didn't work anymore (aborted with
buffer transfer error from one lim)
so i will restart the whole ....
if errors remain - i'll be back

Really really thanks to all for helping me