New Medpro starting Jitter

[big70]

Having 3 portnetworks.

If i do a trace with every PN a TN2302 i get

18:41:11 Calling party trunk-group 241 member 51 cid 0x2511
18:41:11 Calling Number & Name NO-CPNumber NO-CPName
18:41:11 dial 539960
18:41:11 ring station 539960 cid 0x2511
18:41:11 xoip options: faxT modemff tty:US (igc)
xoip ip: [10.10.3.70]:4020
18:41:11 xoip options: faxT modemff tty:US (igc)
xoip ip: [10.10.3.121]:2068
18:41:11 G711A ssff ps:20
rgn:241 [10.10.3.70]:4020
rgn:242 [10.10.3.121]:2068
18:41:13 active station 539960 cid 0x2511
18:41:16 Start Fax PassThru aux:none tone:CED (igc) uid:0x53a01
From voip: [10.10.3.121]:2068
18:41:16 xoip: old bw:83kb new bw:166kb uid:0x53a01 cid:0x2511
18:41:16 Start Fax PassThru aux:none tone:none (igc) uid:0x54e15
From voip: [10.10.3.70]:4020
VOIP data from: [10.10.3.70]:4020
18:41:22 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:1 Avg:0
18:41:22 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2068
18:41:23 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:0 Avg:0
18:41:23 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.70]:4020
18:41:32 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:1 Avg:0
18:41:32 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2068
18:41:33 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:0 Avg:0
18:41:33 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.70]:4020
18:41:42 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:1 Avg:0
18:41:42 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2068
18:41:43 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:0 Avg:0
18:41:43 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.70]:4020
18:41:52 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:1 Avg:0
18:41:52 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2068
18:41:53 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:0 Avg:0
18:41:53 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0

so no jitter.....


After i replace the TN2302 in every PN with a TN2602 fw49-51 or 52 i get jitter and checked the duplex settings.

20:15:51 Calling party trunk-group 243 member 48 cid 0x26c6
20:15:51 Calling Number & Name NO-CPNumber NO-CPName
20:15:51 dial 539960
20:15:51 ring station 539960 cid 0x26c6
20:15:51 xoip options: faxT modemff tty:US (igc)
xoip ip: [10.10.3.170]:2476
20:15:51 xoip options: faxT modemff tty:US (igc)
xoip ip: [10.10.3.121]:2188
20:15:51 G711A ssff ps:20
rgn:243 [10.10.3.170]:2476
rgn:242 [10.10.3.121]:2188
20:15:53 active station 539960 cid 0x26c6
20:15:56 Start Fax PassThru aux:none tone:none (igc) uid:0x54d12
From voip: [10.10.3.170]:2476
20:15:56 xoip: old bw:83kb new bw:166kb uid:0x54d12 cid:0x26c6
20:15:56 Start Fax PassThru aux:none tone:CED (igc) uid:0x53a01
From voip: [10.10.3.121]:2188
VOIP data from: [10.10.3.170]:2476
20:16:03 Jitter:5 5 0 0 0 0 0 0 0 0: Buff:61 WC:0 Avg:5
20:16:03 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2188
20:16:03 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:10 Avg:0
20:16:03 Pkloss:0 0 0 0 0 0 0 * 0 0: Oofo:0 WC:254 Avg:98
VOIP data from: [10.10.3.170]:2476
20:16:11 Jitter:5 5 5 5 5 5 5 5 5 0: Buff:61 WC:0 Avg:5
20:16:11 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2188
20:16:11 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:10 Avg:0
20:16:11 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:254 Avg:97
VOIP data from: [10.10.3.170]:2476
20:16:21 Jitter:5 5 5 5 5 5 5 5 5 5: Buff:61 WC:0 Avg:5
20:16:21 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: [10.10.3.121]:2188
20:16:21 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:100 WC:10 Avg:0
20:16:21 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:254 Avg:96
20:16:29 idle station 539960 cid 0x26c6
20:17:29 TRACE COMPLETE station 539960 cid 0x0


So whats diffrent on the new-medpro,s and where to look to get rid of the jitter....

Greets Peter

 

[Darthion]

Did you ever figure this out?

...look to your left....look to your right....if you do not see someone who is lost, go get the map...

 

[tommyboy23]

Try firmware 54 might help.....