Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

new HDD not detected

Status
Not open for further replies.

itisnotme

Technical User
Oct 13, 2002
1
0
0
SG
i have just bought a new WD 40GB hard disk. but i used it with my old k6 system and the bios could not detect the hdd. it just detect my primary drive forever and nothing happens. could it be a bad disk or the bios is too old to support a new hdd?
 
Your BIOS is too old. You will need to replace the bios or motherboard. It is cheaper to replace the motherboard.

After tax and shipping getting a new bios will cost over $80 plus time to get it.


>---------------------------------------Lawrence Feldman
SR. QA. Engineer SNAP Appliance
lfeldman@snapappliance.com

 
Cheaper suggesstion. Go purchase a Promise TX133 card.
Put your 40 gig on the first channel and disable the on board primary ide or use it for cdrom/dvd, etc. devices.
If the 40 gig drive is configured to to boot, then it will become your boot device. The promise card is about $33-$50 depending on where you buy it.

Klon Shugart
Data Recovery Specialist
CCNA/MCP2K/CDRT
Microsoft Certified Partners
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top