New DID Block Routing

[MMTdoN]

We just got a new group of DID numbers 9400-9420. Our current block is 2800-2899. We use "9" do access an outgoing route. How do I route the New 94xx numbers to say a dn 44xx. Is this possible with the lead number being the access code?

Thank you in advance.
Don

 

[GHTROUT]

That is done in LD49 and called Incoming Digit Conversion (IDC) At least it is possible...another more expert poster will follow I hope. I am not long on IDC

~

http://www.GHTROUT.com/

 

[3tdp33ler]

You can use IDC table to translate incoming DID digits to any internal DNs.
LD 49 NEW/CHG IDC xx to create/modify an IDC table.
LD 16 CHG RDB IDC=YES, DCNO/NDNO = xx to enable IDC in route.

 

[johnpoole]

before you jump into ld 49, are you getting 3 or 4 digits from the provider?

john poole
bellsouth business
columbia,sc

 

[MMTdoN]

I believe 4.. I am still waitng for full telco details as I did not order.. I just Doo.. What would change?

 

[NastyNed2]

Something similar to this recently happened to our county phone system. They had to quit using 9 for an outside line and program things to use 8 instead.