Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

New Computer no display

Status
Not open for further replies.

Martin911

IS-IT--Management
May 17, 2004
102
CA
I built up a new computer installed the motherboard CPU and video card and memory but when i boot up i get nothing on the screen. The video card is working i tried it on another system. I made sure to double check to see if everything was connected properly and it is. I tried using a PCI video card on the new system i made and had no display at all neither.

So i assume it isnt the video card the problem since i tried with a different one and it wasnt working neither and both are working in another system.

Could it be the motherboard? I get no beep at all while booting the system.

Thanks,

Martin
 
Does the motherboard have on-board video? What's the make/model of the motherboard, video card, memory, etc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top