Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
New at Cabling ...any advice? 1
- Thread starter numinds
- Start date
KwicksPCServices
Vendor
Canadian or US currency?
You should charge by the hour or flat fee. Most clients prefer the flat fee - since it allows them to set a budget. But, be sure to evaluate the site fully before setting your flat fee price. Whether hourly or flat fee, rates are generally much lower than computer related troubleshooting, network configuration and administration because is requires less skills to run cable.
You should charge by the hour or flat fee. Most clients prefer the flat fee - since it allows them to set a budget. But, be sure to evaluate the site fully before setting your flat fee price. Whether hourly or flat fee, rates are generally much lower than computer related troubleshooting, network configuration and administration because is requires less skills to run cable.
- Thread starter
- #3
-
1
- #4
daronwilson
Vendor
To come up with a figure, I would want to know what type of cable we are talking about. Since the type of wire can easily double or triple the price, and the type of termination can also vary it is a little tough to guess.
If I am 'guessing' on a simple drop, it would include one cat5e wire (average length of 120 feet), termination at the work station outlet and punched down on a patchrack in the telecom closet, tested to 100 Mhz, I would guess around $120. That number can vary from 60 to 200 depending on wire (level 3, cat5, cat6, plenum) what the terminations are (specific brand of jacks, patchrack, shielding) and how many I am doing in one trip. If it is a job of 128 outlets, the price could likely be adjusted down. If I have to drive across town, haul stuff in, move desks and furntiture to add one jack, the price may go up.
It's real hard to guess accurately with no specifics.
Good Luck! It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
If I am 'guessing' on a simple drop, it would include one cat5e wire (average length of 120 feet), termination at the work station outlet and punched down on a patchrack in the telecom closet, tested to 100 Mhz, I would guess around $120. That number can vary from 60 to 200 depending on wire (level 3, cat5, cat6, plenum) what the terminations are (specific brand of jacks, patchrack, shielding) and how many I am doing in one trip. If it is a job of 128 outlets, the price could likely be adjusted down. If I have to drive across town, haul stuff in, move desks and furntiture to add one jack, the price may go up.
It's real hard to guess accurately with no specifics.
Good Luck! It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question