Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Networking two BCM 50's

Status
Not open for further replies.

ccarmock

Technical User
Oct 23, 2005
263
0
0
GB
Soon I will need to network two BCM 50's together.
Is the recommendation in this instance to switch them to 4 digit extension numbers and have one of them in the 2xxx range and the other 3xxx ?

or is it ok to keep them at 3 digit extensions?

Also I will want the capability of making a call from an extension on BCM A that dials out using a trunk on BCM B - any tips for that?
 
You can use steering codes to contact each site such as 71 or 72 etc as long as the number is spare. Also you can have a linked number scheme.

You can configure phones to dial out on lines across a network, but you need to "play" with remote access packages and do some tweeking in the routing tables.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top