Networking the Nortel Option 11C to a Mitel SX 2000 via QSIG

[mywayray]

I'm looking for any advice on how to interconnect the Nortel Option 11C to a Mitel SX 2000-
I have confirmed that the correct hardware and software are in both switched and I looking for some direction regarding 'tandem' calls betweem them-
In the Nortel the method uses 'steering codes' to point a dialed number to a Route / Trunk Group-
Any help on setting up the Mitel SX 2000 DS-1, building the routing tables, etc... would be of great help

 

[johnpoole]

the routing tables in the mitel are not that bad, doyou have it working from the merridian to the mitel? you will get a lot more current help on the mitel in that forum, anyone here can help with cdp if that portion is not complete

john poole
bellsouth business
columbia,sc

 

[mywayray]

John-
I posted the question on both forums-
I haven’t touched a Mitel in quite some time and only MAC-
I have reviewed your postings for the Nortel QSIG config & have QSIG "Tie's" interconnecting the Nortel to Avaya G3's & Cisco Call Managers- understanding the Mitel's 'tandem' capabilities is my current task-
Thanks for the reply