lucidity23
Programmer
Ok...here is the prob I am having...
I have 2 systems, a router with 1 port and a hub with 5 ports...
the current setup is the DSL line comes into the hub and PC #1 comes off the hub...PC #2 is connected to the router which is connected to the hub...
Here are some of the problems I am hitting...I cannot access PC #2 when I am on PC#1 when I go into network neighborhood...PC #2 is on and running and surfing the net, however I cannot access it that way from Pc #1...
other troubles...the router and IP Filtering... I have a few ports I need to keep open but I am uncertain if the IP I send the open ports too...is there something I need to do on the system I am sending that IP to? do I need to go into the network settings and assign that IP?
For now that should be it...more questions will follow I am certain...
- carpe diem -
I have 2 systems, a router with 1 port and a hub with 5 ports...
the current setup is the DSL line comes into the hub and PC #1 comes off the hub...PC #2 is connected to the router which is connected to the hub...
Here are some of the problems I am hitting...I cannot access PC #2 when I am on PC#1 when I go into network neighborhood...PC #2 is on and running and surfing the net, however I cannot access it that way from Pc #1...
other troubles...the router and IP Filtering... I have a few ports I need to keep open but I am uncertain if the IP I send the open ports too...is there something I need to do on the system I am sending that IP to? do I need to go into the network settings and assign that IP?
For now that should be it...more questions will follow I am certain...
- carpe diem -