Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Networked Definity Question

Status
Not open for further replies.

Sooperbohl

Technical User
Mar 2, 2004
164
US
Greetings from Seattle,

I have to networked Prologic systems that share a common Intuity Audix. The Audix is at site A. Users at site B when the currently pick up their handset and dial "0" they are getting site A's auto attendant. Site B would like to simplify things and go directly to the operator when they dial "0". You would think this could be done in the routing. Hopefully there is an easy solution for this.

Thanks much,

Soop
 
Did you ever find a resolution to this, where did you change these parameters? I have a similar situation, but am having trouble locating the field where this is set.

Thank You,
Christen Aiguier
 
Display your dialplans and look at what is assigned to Sites B's zero. Is it extension or Attendant?
 
After much hunting, I found the entry in a vector...unexpected location, but I'm all set now.
"change vector x"
route-to number xxxx with cov y if unconditinoally
stop

Thanks!
Christen
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top