I have a pair of Cisco 1700 series routers bridging to a single workstation. I have to remove this bridge and route packets to this single workstation. I figured to hard code an ip but how will the user authentication work. I don't want to install a server for a single machine.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
network user authentication 1
- Thread starter JurgenM
- Start date
-
1
- #2
If you are asking how a user would authenticate to a server on a seperate network enable IP-HELPER which will allow netbios broadcast to pass I recommend using a directed ip-helper so it will only unicast the netbios to the server instead of broadcasting on the other network.
- Status
Similar threads
- Locked
- Question