Network speed

[AvayaDude]

How can I find out the configuration of my MapD and CMS with reference to network speed. 100/full or 10/full.

 

[stringandtwocans]

if you are using R11 the command "get ether" will do it, if the load is previous you can't

 

[AvayaDude]

thanks stringandtwocans, that worked great for the CLan boards, anyway of finding out the speed of my MapD. My MapD board does not support the "get ether" command.

 

[stringandtwocans]

Sorry, I'm not sure how on mapd, I have never dialed into one, but sure that it is there somewhere

 

[Tolson]

If you have had the Mapd for more than the last 6 months, they are 10Mb, Do not connect it to a 100Mb source, it really does cause problems with the system.

Tolson

 

[stringandtwocans]

did find one other command I had not used before
change options-options or display options-options