Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network Region Questions

Status
Not open for further replies.

optionsleft

Vendor
Jan 13, 2007
124
EU
I have S8700/G650 CM3.1, on PN1 there is 1 clan & 1 medpro with NR=1..I also have 2nd clan on the same PN with different network region NR=2 but no medpro on this NR. Now an ip-phones from remote site register on the 2nd clan with no medpro, what happen then when it is going to make a call to analog, digital & ip-stations on different network regions? I'm sorry but I don't have the box to play around with at this time.

thanks,

mwooks
 
It all depends on what inter network region connection you have programmed on the change ip-network-r form. See page 3 and you can define the connection between NR1 and NR2.
 
To make my question short on network region(NR)clan1=NR=1, clan2=NR=2, medpro1=NR=3. Internetwork-region is configured in between the given NRs, will the ip stations registered on both clan be able to talk to each other?

Thanks,

mwooks
 
The short answer: Yes.
The depends clause: Presuming that codec sets are compatible, Yes.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top