Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network MICS with Cisco

Status
Not open for further replies.
BogeyShooter

BogeyShooter

Programmer
Nov 21, 2006
135
US
Customer has MICS running 5.0. There are 2 DTI cards installed. One is being used as a PRI. The other is configured as a T1 that is not being used. The customer wants to network that MICS with a Cisco switch. I thought that in order to do that the software had to be of the "XC" variety. Is that correct or can we use the current 5.0 (SP: 30BKG06 NAT) software?
 
Sort by date Sort by votes
X for Expansion and C for Companion

And because its already in there you are good to go.

Suggest upgrade to 7.1



________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
217
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
343
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Norstar MICS Extension Call Forward External 4
Replies
12
Views
254
ttEstiNg2023
ttEstiNg2023
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
661
Nortel dino
N
RedMaligator
  • Locked
  • Question
Nortel MICS connected to Call Pilot
Replies
10
Views
250
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top