Has anybody ever got to the bottom of this? I've seen a few posts but no definitive answer.
Basically we have various IPO's on various levels of software and none of the ISDN dial ups appear to work properly anymore. The ISDN TA dials up and connects, manager (10.1 or 9.1) sees the system, username and password is entered but I get the error message. Local comms on site are fine.
I've tried rolling back windows to last Thurs which is tha last time any of them worked, I've tried setting secure comms to non and turning it off within manager, I've also tried an earlier driverr for the TA and the lastest but no luck.
Anyone any ideas?
Ones I have a direct IP link to via the same manager are fine.
Thanks in anticipation
ACSS SMEC
APSS SMEC
ACA IP Telephoney Implement
Basically we have various IPO's on various levels of software and none of the ISDN dial ups appear to work properly anymore. The ISDN TA dials up and connects, manager (10.1 or 9.1) sees the system, username and password is entered but I get the error message. Local comms on site are fine.
I've tried rolling back windows to last Thurs which is tha last time any of them worked, I've tried setting secure comms to non and turning it off within manager, I've also tried an earlier driverr for the TA and the lastest but no luck.
Anyone any ideas?
Ones I have a direct IP link to via the same manager are fine.
Thanks in anticipation
ACSS SMEC
APSS SMEC
ACA IP Telephoney Implement