Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Network Boot Disk Configurations
- Thread starter Jcdstna2
- Start date
You are talking about the snapshot installation correct.
You first install NT only and then take a snapshot.
2. Install required applications and take another diff.( this is a difference between the old file first taken and then the installed will be compared to form the second one)
Preparing the boot disk from the server manager..you can see 3 options..select the network boot disk ..(make sure you have the same network cards even check before installing the int / irq are same ..for this installation else you may have problems.
finally ..use the diff files and use apply command and install the applications also.
You first install NT only and then take a snapshot.
2. Install required applications and take another diff.( this is a difference between the old file first taken and then the installed will be compared to form the second one)
Preparing the boot disk from the server manager..you can see 3 options..select the network boot disk ..(make sure you have the same network cards even check before installing the int / irq are same ..for this installation else you may have problems.
finally ..use the diff files and use apply command and install the applications also.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question