Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Network 2 MICS 6.0
- Thread starter DTone
- Start date
Well, if the AA picks up the call on site A then you could do a transfer point using the destination code of the point to point channel (IE., 8) and the extension number. On the other side you'd have a target line set up with the receive digits being the extension number (223).
"for Jim press 1"
1 = external transfer point (using pool A) - digits 223.
If all of your extensions on the other side begin with 2 and everyone on the near side begin with 5 then you could set up your destination code to be 2* with absorb length none.
"if you know your party's extension you may dial it at any time......"
223 = 2 hits as the desti code, picks up the point to point channels, sends 223 to the other side as the absorb length was set to none so that it sends all the digits dialed. Other side has a target line set up with received digits 223. Rings the phone. MRoberts
mroberts@americaii.com
"for Jim press 1"
1 = external transfer point (using pool A) - digits 223.
If all of your extensions on the other side begin with 2 and everyone on the near side begin with 5 then you could set up your destination code to be 2* with absorb length none.
"if you know your party's extension you may dial it at any time......"
223 = 2 hits as the desti code, picks up the point to point channels, sends 223 to the other side as the absorb length was set to none so that it sends all the digits dialed. Other side has a target line set up with received digits 223. Rings the phone. MRoberts
mroberts@americaii.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question