So I'm using Networker client 4.1.2 on a NW6/SP2 server. Is it true that I need IPX installed for the client to work? Does anybody know of any plans that Legato has to support IP-only backups of a NetWare server? If they don't support IP-only backups, I wonder what the hold-up is. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NetWare 6/SP2 and Networker
- Thread starter hocpoc
- Start date
I think Networker supports ip-only backup. We have Netware 5.1 (ip-only) with nwclient 4.21 and Networker 6.1.3 on a solaris machine. All works fine.
the reason for your problem may be an network problem (dns, wrong hosts, wrong resolv.cfg or anything else)
the reason for your problem may be an network problem (dns, wrong hosts, wrong resolv.cfg or anything else)
Hi,
what you also can do is edit the rpcnet.cfg (by default SYS:\NSR\).
Copy the last two lines to the top so that he uses TCP/IP / UDP first.
This is only needed when you have multiple protocols on your NetWare Server. By default he uses IP.
Have a nice day
Stefan
what you also can do is edit the rpcnet.cfg (by default SYS:\NSR\).
Copy the last two lines to the top so that he uses TCP/IP / UDP first.
This is only needed when you have multiple protocols on your NetWare Server. By default he uses IP.
Have a nice day
Stefan
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question