Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Netware 4.11 install on a Compaq 1850R
- Thread starter apsanixay
- Start date
JockMullin
MIS
Hi
These drivers seem to be available from HP here:
Although that model is "retired" they seem to be still supporting it. You will notice there are several possibilities, depending which devices are installed in your machine.
Jock
These drivers seem to be available from HP here:
Although that model is "retired" they seem to be still supporting it. You will notice there are several possibilities, depending which devices are installed in your machine.
Jock
- Thread starter
- #3
yeah I went there... to be honest, nothing on that page worked. I eventually found the correct drivers array drivers from Novell's list of default controllers and I completly dropped the onboard Flex3 NIC. I instead went with a PCI 3com 3c905b-TX with drivers provided from 3com's support site.
I tell you what, installing 11 year old software on 6 year old hardware is a pain in the butt!
I tell you what, installing 11 year old software on 6 year old hardware is a pain in the butt!
marvhuffaker
MIS
We ran Netware 4.11 on 1850R's at Worldcom back a long time ago when I used to work there. No problems with Netware, but I hated those 1850R's.. Pieces of crap.
Marvin Huffaker, MCNE
Marvin Huffaker, MCNE
- Status
Similar threads
- Locked
- Question
- Locked
- Question