Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Netvault Client 'Invalid Arguments' when starting gui
- Thread starter chukostar
- Start date
You need to edit the gui.cfg in the Bakbone directory and change the value to servers=<put server name here> to
server={ip of your server}
ex:
server=192.168.1.10
DO NOT USE NOTEPAD to edit. Using notepad will change the extension on the file to be a .txt and you want the extenstion to be a .cfg so use WORDPAD to edit the file. Or use what I do, vim for windows.
that will solve your problem.
server={ip of your server}
ex:
server=192.168.1.10
DO NOT USE NOTEPAD to edit. Using notepad will change the extension on the file to be a .txt and you want the extenstion to be a .cfg so use WORDPAD to edit the file. Or use what I do, vim for windows.
that will solve your problem.
Sorry, the server= should be the name of the server not the IP of the server and it is the name of the server you are trying to control.
server=Snap07345
If this is a SnapServer you are trying to control, you can use the "Add Clients" button in the UI which will establish a communication link bewtween the client and the server and edit the gui.cfg file on the client for you.
server=Snap07345
If this is a SnapServer you are trying to control, you can use the "Add Clients" button in the UI which will establish a communication link bewtween the client and the server and edit the gui.cfg file on the client for you.
- Thread starter
- #4
- Status