Netgear vfs318 and VPN phone trouble 1

[tlpeter]

I have an IP500V2 on 6.0.14 and a Netgear FVS318V3

The VPN phone (9650 or 9620) does make a VPN to the router but that is it.
It keeps on discovering.
I have an iproute in the ipo to the router.
I am trying it for a couple of days now and i cannot find it.

IPO = 192.168.1.100
Router = 192.168.1.2

I tried static routes in the router.
I tried services (ports from 1500 till 55000)
I tried different virtual ip addresses.

It just does not want to see the ipo.
Anyone an idea ?


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[craig90]

Thanks tlpeter,

I have just connected with a 5610 phone and all works well. The tunnel is established and the phone finds the IPO and asks for an ext no. All good.

However the 9620 phones just sits on dicover!! using the same tunnel settings as the 5610.

Any ideas.

 

[tlpeter]

I have seen that today.
The problem was that the local iprange was the same as the iprange of the ipo.
Example:

Ipo on 192.168.1.0 range
Home on192.168.1.0 range

Even with mode config this was a problem.


BAZINGA!

I'm not insane, my mother had me tested!