ServerNoobie
Technical User
Hey everyone, I recently purchased a 5000 and was considering upgrading the 350mhz PII to dual 500mhz PIII
processors. I have never done an install like this before, and have seen several references to VRM settings in my search for information. My board is set up to receive (2) slot 1's (from the factory)....can anyone tell me what I need to do in order to accomodate voltage (if anything at all)? Here are all of my specs:
Currently:
1 350mhz PII
FRU# 02K2776
UPGRADE CPU'S:
#1: 500/512/100/2.0v S1
10020057-0063 Philipines
98 SL35E
#2: 500/512/100/2.0v S1
10030052-0142 Philipines
98 SL35E
Sorry for writing such a long post!!
Thanks
processors. I have never done an install like this before, and have seen several references to VRM settings in my search for information. My board is set up to receive (2) slot 1's (from the factory)....can anyone tell me what I need to do in order to accomodate voltage (if anything at all)? Here are all of my specs:
Currently:
1 350mhz PII
FRU# 02K2776
UPGRADE CPU'S:
#1: 500/512/100/2.0v S1
10020057-0063 Philipines
98 SL35E
#2: 500/512/100/2.0v S1
10030052-0142 Philipines
98 SL35E
Sorry for writing such a long post!!
Thanks