robertdenker
IS-IT--Management
I´ve got a Netbuilder II (CEC 20, F.W. 2.7, Software v.10.1/Complete Protocols)Router with an Ethernet AUI Card!
I connect the Router Card via a CenterCom 210TS AUI Transciever to a netgear 100 Mbit netgear switch (autonego).
The Netgear Switch shows a "Link", but when i Ping from a client to the Router NIC i´ve got more the 50% Packet lost!
I´ve got another Netbuilder II 4 Port and an other Netbuilder II 8 Port, but the same Problems!
I also have a 100Bast Tx Card for the NBII, but there are 0% Lost, everythings seems ok!
The AUI LED on the Ethernet NIC of the Router doesen´t light! Must it? I think so! On the other NBII 4 PORT i have an Ethernet AUI/BNC NIC where the same Problems are, and the "Rx" LED flashs very light the whole time.
What happend???
I´m Frustrated!
Greetings from Germany, so sorry for my bad english!
Robert
I connect the Router Card via a CenterCom 210TS AUI Transciever to a netgear 100 Mbit netgear switch (autonego).
The Netgear Switch shows a "Link", but when i Ping from a client to the Router NIC i´ve got more the 50% Packet lost!
I´ve got another Netbuilder II 4 Port and an other Netbuilder II 8 Port, but the same Problems!
I also have a 100Bast Tx Card for the NBII, but there are 0% Lost, everythings seems ok!
The AUI LED on the Ethernet NIC of the Router doesen´t light! Must it? I think so! On the other NBII 4 PORT i have an Ethernet AUI/BNC NIC where the same Problems are, and the "Rx" LED flashs very light the whole time.
What happend???
I´m Frustrated!
Greetings from Germany, so sorry for my bad english!
Robert