Netbuilder II, 10Mbit Eth, Ping losts...

[robertdenker]

Hi again..

I´ve got a 4-Port NBII with CEC20 Bord!

..with the following boards:
1x 10BaseFL
2x 10Base2/AUI
1x 100BaseFX

All interfaces work fine, only the 10Base2/Aui bord has problems!

I have got a lot of packet losts, a average of 50% are lost by pinging!

I have 4 other 10Base2/AUI boards tried, but all boards have the same problems!

The Router works with software 10.1, and displays no errors at startup!

Does anyone know what happends!?

Thanks in advance!

 

[Brat]

Hi, robert

Check processor load. Maybe CEC 20 board is to slow to maintain whole bandwidth.

AFAIK command is:
EnterpriseOS[1]> sh -sys stat

But im not sure

Brat

 

[robertdenker]

Hmmmmm....

I´ve pinged a whole night to the 10BaseFL, without any losts

I only have problems with pinging to the 10Base2/AUI cards...

I can´t belive that all cards are damaged.....

 

[Brat]

Hi, robert

Have you checked your AUI<->TP transceiver?

Brat

 

[robertdenker]

Yes i changed the Transciever and Cable too!

Everytime the same problem..

i´m still confused

 

[robertdenker]

I´ve make another trie with ataching the pinging Station over a hub with a 1:1 Cabel!

There i dont have any losts!

It seems to bee a problem, with the direct connection over a crossover cabel!