Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NetApp .lod Firmware for ST373307FC Hard Drive (firmware 0000)

Status
Not open for further replies.
May 26, 2009
1
US
Hi,

Just wondering if anyone can assist me with getting the firmware for a Seagate Cheetah ST373307FC hard drive. The segate firmware version is 0000.

Just to give a heads up, I have a netapp FAS250 which lost a hard drive and I recently just purchased a generic replacement as there is no support contract for our netapp device. Also if I'd like to purchase replacement directly from NetApp it would be quite pricey.

From my research I have found out that you can update the firmware of the drive while it is plugged in however, I do not have the NetApp firmware for this particular hard drive. I have checked the etc directory on the system however, the firmware version I need isn't there.

Does anyone have access NetApp support and can quite possibly can send me the NetApp firmware for this particular hard drive?

Thanks if you can!
 
You probably already have the correct file on the system and may not know it! It is X272_S10K7073F10.NA07.LOD

Best regards,
Dana
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top