I installed a new machine with windows 10 to use with our point of sale system. The machine new machine has no physical LPT ports on it thus in the device manager no LPT ports are listed. for the cash drawer to operate our POS system requires that we map the receipt printer which is connected by USB to an LPT port so the system can send the drawer open code as the software itself only supports LPT or COM printers (ie NET USE LPT2: \\127.0.0.1\\receiptprinter). I tried manually adding a legacy LPT port through the device manager, but Windows does not know how to configure it--I'm guessing because there are no actual physical LPT ports on the machine. I tried various manual configurations, but no luck. Does anyone out there know if there is a way to add an LPT port to a machine that has no actual physical LPT ports?